Bonnett, Austin H., "Austin" (M’68, SM’90, F’92)
Fellow - "For technical leadership and contributions in the field manufacturing, design, application, operation, and maintenance of ac induction motors."
Current Employment:
U. S. Electrical Motors, Div. of Emerson Electric Co.
8050 W. Florissant Avenue
St. Louis, MO 63136
Tel. No.:(314) 595-8401
FAX:(314) 595-8587
Residence:
14546 Gatemont Drive
Chesterfield, MO 63017
Tel. No.:(314) 256-9162
Spouse: Darlene
IEEE Memberships:
- Industry Applications Society
- IEEE Pulp and Paper Industry
Education:
- California State University - BSEE - 1966
- University of Phoenix - MBA - 1982
PCIC Activity:
- Active in PCIC since 1968
- Member: Chemical and Papers Review Subcommittees
Papers Authored/Co-Authored:
- PCIC 1997: Understanding The NEMA Motor-Generator Standards of Section MG-1-1993, Revision 3, Three-Phase Induction Motors, A. H. Bonnett and G. C. Soukup
- P&PI 1997: Available Insulation Systems for PWM Inverter-Fed Motors, A. H. Bonnett, Published: IEEE Industry Applications Magazine - 1998
- PCIC 1996: A Comparison Between Motor Insulation Systems Available for PWM Inverter Fed Motors, A. H. Bonnett, PCIC 2nd Best Paper, Published: IA Transactions - 1997
- P&PI 1996: Quality and Reliability of Energy-Efficient Motors, A. H. Bonnett,
- Published: IEEE Industry Applications Magazine - 1997
- PCIC 1995: Reliability Comparison Between Standard And Energy Efficient Motors, A. H. Bonnett, PCIC Honorable Mention, Published: IA Transactions - 1997
- P&PI 1995: An Update On How Current And Proposed Laws, Regulations, Codes, Standards And Recommended Practices Impact The Application Of A. C. Induction Motors,A. H. Bonnett, P&PI Prize Paper
- PCIC 1994: An Engineering Guide On How Current And Proposed Laws, Regulations, Codes, Standards And Recommended Practices Impact The Application Of A.C. Induction Motors, A. H. Bonnett, Updated as Regulatory Impact on the Application of AC Induction Motors and Published: IEEE Industry Applications Magazine - 1996
- P&PI 1994: Analysis Of The Impact Of Pulse-Width Modulated Inverter Voltage Waveforms On AC Induction Motors, A. H. Bonnett, P&PI Prize Paper, Meritorious Engineering Award, Published: IA Transactions - 1996
- P&PI 1994: Energy Policy Act Of 1992 Review As It Pertains To AC Induction Motors, A. H. Bonnett
- PCIC 1993: An Update On AC Induction Motor Efficiency, A. H. Bonnett,
- PCIC Honorable Mention, Published: IA Transactions - 1994
- P&PI 1993: Cause and Analysis of Anti-Friction Bearing Failures in AC Induction Motors, A. H. Bonnett, P&PI Best Paper
- PCIC 1992: Cause And Analysis Of Bearing Failures In Electrical Motors, A. H. Bonnett, Published: IA Transactions - 1993
- P&PI 1992: Understanding The Changing Requirements And Opportunities For Improvement Of Operating Efficiency Of AC Motors, A. H. Bonnett, P&PI Prize Paper,Published: IA Transactions - 1993
- P&PI 1991: Cause And Analysis Of Stator And Rotor Failures In Three-Phase Squirrel-Cage Induction Motors, A. H. Bonnett and G. C. Soukup, P&PI Best Paper,Published: IA Transactions - 1992
- The New NEMA Design E Induction Motor - Characteristics And Performance Compared With Designs A and B,
A. H. Bonnett, Published: Industry Applications Society Newsletter - 1994
- PCIC 1990: The Benefits Of Allowing For Increased Starting Current In AC Squirrel Cage Induction Motors, A. H. Bonnett, PCIC 3rd Best Paper, Presented at IAS - 1991, Published: IA Transactions - 1991
- IAS 1989: A Case For Design "A" Induction Motors, A. H. Bonnett and L. Laub
- PCIC 1989: Safety Considerations For The Application, Installation, Operation And Maintenance Of Industrial AC Induction Motors, A. H. Bonnett, Published: IA Transactions - 1989, Presented: IEEE 1991 Pulp & Paper Conference
- PCIC 1987: Analysis Of Rotor Failures In Squirrel Cage Induction Motors, A. H. Bonnett and G. C. Soukup
- PCIC 1985: Rotor Failures In Squirrel Cage Induction Motors, A. H. Bonnett and G. C. Soukup, PCIC 3rd Best Paper, Published: IA Transactions - 1986
- PCIC 1980: Understanding Power Factor In Squirrel Cage Induction Motors, A. H. Bonnett
- PCIC 1979: Understanding Efficiency in Squirrel-Cage Induction Motors, A. H. Bonnett,Published: IA Transactions - 1980
- PCIC 1978: Prevention Of Winding Failures In Three Phase Squirrel Cage Induction Motors, A. H. Bonnett
- PCIC 1977: Analysis Of Winding Failures In Three Phase Squirrel Cage Induction Motors, A. H. Bonnett, Published: IA Transactions - 1978
- PCIC 1977: Vacuum Impregnation Of Large Random Wound Stators, A. H. Bonnett and D. L. Rimmell
- PCIC 1976: The Cause Of Winding Failures In Three Phase Induction Motors, A. H. Bonnett
- EASA 1972: Vacuum Pressure Impregnation (Form Wound), A. H. Bonnett
Other Professional Achievements:
- Industry Applications Society Outstanding Achievement Award - 1996
"for outstanding contribution in the application of electricity to industry in accordance with the scope of the Industry Applications Society"
- Member IEEE Pulp & Paper Industry Committee Drives and Controls Subcommittee
- Ad Hoc Motor Recommended Practice Subcommittee: 1995 - present
- Member IEEE 841 Working Group (Chemical Industry Severe Duty Motor):Recommended Practice 841-1986: 1984 - 1986
- Standard 841-1995: 1986 - present
- Providing leadership in educating his company, NEMA, IEEE, numerous utilities and users in motor efficiency. Leading the effort in trying to change NEMA’s industry standards to allow more focus in efficiency and energy conservation. Leading his company in new motor technology development which will provide for higher efficiency, longer life products, safer to operate in the current and future demanding environments.