The Standards Subcommittee offers an opportunity to keep abreast of what is happening in standards both in IEEE and in other worldwide standard organizations. With rapid technology change and global harmonization, standards activity becomes increasingly important.
Standards Working Groups
The following Standards Working Groups are sponsored by the Petroleum and Chemical Industry Committee:
|
Std Number |
Standard Title |
Chair |
|
45 |
Electrical Installations on Shipboard |
H.R. Steward |
|
P303 |
RP for Auxiliary Devices for Motors in Class I, Groups A, B, C & D, Div 2 Locations |
Travis Griffith |
|
P463 |
Std for Electrical Safety Practices in Electrolytic Cell Line Working Zones |
Ken White |
|
P515 |
Std for the Testing, Design, Installation, & Maintenance of Electrical Resistance Heat Tracing for Industrial Applications |
Richard Hulett |
|
P515.1 |
RP for the Testing, Design, Installations, & Maintenance of Electric Resistance Heat Tracing for Commercial Applications |
Wayne Williams |
|
P576 |
RP for Installation, Termination, & Testing of Insulated Power Cable as Used in Industrial and Commercial Applications |
Wayne Madden |
|
P841 |
Petroleum & Chemical Std for Severe Duty TEFC Squirrel Cage Induction Motors - 500 HP & Below |
David Rains |
|
P844 |
Electrical Impedance, Induction, & Skin Effect Heating of Pipelines & Vessels |
Bob Rafferty |
|
P1017
|
RP for Field Testing Electric Submersible Pump Cable
|
Marcus Durham
|
|
P1018
|
RP for Specifying Electric Submersible Pump Cable - Ethylene Propylene Rubber Insulation
|
Marcus Durham
|
|
P1019
|
RP for Specifying Electric Submersible Pump Cable - Propylene Insulation
|
Marcus Durham
|
|
P1068
|
RP for Repair & Rewinding of Motors for the Petroleum & Chemical Industry
|
Travis Griffith
|
|
P1242
|
Standard for Selecting & Specifying Cables for Petrochemical Plant Applications
|
Don Voltz
|
|
P1349
|
Guide for Application of Electric Motors in Class I, Div 2 Hazardous Locations
|
Lorraine Padden
|
|
P1458
|
RP for the Selection, Application, Field Testing, and Life Expectancy of Molded Case Circuit Breakers for Industrial Applications
|
Gary Donner
|
|
P1566
|
Standard for Adjustable Frequency Drives Rated at 500 HP & Larger
|
Bill Lockley
|
|
P1580
|
Draft Recommended Practice for Marine Cable for use on Shipboard and Fixed or Floating Marine Platforms
|
Rudy Bright
|
|
P1584
|
Guide for Performing Arc Flash Hazard Calculations
|
Craig Wellman
|
|
P1662
|
Guide for the design and application of Power Electronics in Electrical Power Systems on Marine Ships
|
Yuri Khersonsky
|
|
P1673
|
Requirements for Conduit & Cable Seals for Field Connected Wiring to Equipment in Petroleum and Chemical Industry Exposed to Pressures Above 1.5 kilopascals (0.22psi)
|
Marty Cole
Daleep Mohla |
|
P1683
|
Standard for Motor Control Centers Rated Up To 1000V with Requirements Intended to Reduce Injures and Improve Reliability
|
Ben McClung
|
|
P1709
|
Recommended Practice for 1 to 35 KV Medium Voltage DC Power Systems on Ships
|
Yuri Khersonsky
|
|
P1713
|
Electrical Shore-to-Ship Connections |
Kevin Peterson
|
Standards Subcommittee Operating Procedures
Standards Working Groups Operating Procedures
