|
Updated 7/22/2008
This list of papers is to be presented at the 2008 IEEE-PCIC Conference in Cincinnati.
It is best to check the website or the final mailer for any last minute changes.
MONDAY, SEPTEMBER 22, 2008 – GENERAL TECHNICAL SESSION I –
PAVILLION-CAPRICE, (HILTON)
8:15 A.M. – 11:30 A.M. Presiding – Lanny Floyd
PCIC – 2008 – 1 The Evolution of a “Hybrid” System by Integrating the Best Concepts from the NEC®, CEC® and IEC®
Marty Cole Hubbell Canada
Tim Driscoll Shell Canada Ltd.
Ken Martin Brodwell Industrial Sales Ltd
George Morlidge Fluor Canada Ltd.
Rob Roberton Shell Canada Limited
PCIC – 2008 – 2 The Three-Phase Ground-Fault Circuit-Interrupter System - A Novel Approach to Prevent Electrocution
Paul Hamer Chevron Energy Technology
PCIC – 2008 – 3 DEATH BY GROUNDING
Donald Zipse Electrical Forensics LLC
MONDAY, SEPTEMBER 22, 2008 – GENERAL TECHNICAL SESSION II –
HALL OF MIRRORS, (HILTON)
2:00 P.M. – 5:00 P.M. Presiding – Jim Rozsits
PCIC – 2008 – 4 Arc Flash Incident Energy Reduction Using Zone Selective Interlocking
Donna Hodgson Shell Exploration and Production Co.
David Shipp Eaton Electrical
PCIC – 2008 – 5 CT SATURATION CALCULATIONS - ARE THEY APPLICABLE IN THE MODERN WORLD? – PART III, LOW-RATIO, HIGH-CURRENT CT/MICROPROCESSOR RELAY COMPARISONS AT A HIGH-CURRENT TESTING LABORATORY
Roy Cosse Chevron
James Bowen Powell Electrical Systems Inc.
Donald Dunn Aramco Services Company
Robert Spiewak Dashiell LLC
PCIC – 2008 – 6 THE NIOSH “Prevention through Design” Initiative APPLIED to Electrical Hazards in Construction
Danny Liggett DuPont
H Landis Floyd DuPont
MONDAY, SEPTEMBER 22, 2008 – PRODUCTION TECHNICAL SESSION I –
PAVILLION-CAPRICE, (HILTON)
2:00 P.M. – 5:00 P.M. Presiding – Dave Stewart
PCIC – 2008 – 7 Lessons Learned from Generator Tripping Events at Industrial Facilities
Charles Mozina Beckwith Electric
PCIC – 2008 – 8 Transient Voltage Aspects of Grounding
Tom Brinner PM&D Engineering, Inc.
Robert Durham D2 Tech Solutions, Inc.
PCIC – 2008 – 9 Flammable Mixture Analysis for Hazardous Area Classification
Allan Bozek EngWorks Inc.
Vince Rowe Marex Canada Limited
TUESDAY, SEPTEMBER 23, 2008 – REFINING TECHNICAL SESSION I –
PAVILLION, (HILTON)
8:30 A.M. – 11:30 A.M. Presiding – Janet Flores
PCIC – 2008 –10 A Motor Primer - Part 7
Gary Donner Operation Technology Inc.
Patrick McCarty Baldor Reliance
Timothy Paschall Baldor Reliance
PCIC – 2008 – 11 Electrical Process Seal Requirements in North American Electrical Codes
Tim Driscoll Shell Canada Ltd.
Marty Cole Hubbell Canada
Rene Leduc Marex Canada Limited
PCIC – 2008 – 12 API 546 3RD EDITION – MAKING SYNCHRONOUS MACHINES BETTER
Bill Lockley Lockley Engineering
Mark Chisholm GE
Travis Griffith GE Oil & Gas
Barry Wood Chevron
Gabe D’Alleva ExxonMobil
TUESDAY, SEPTEMBER 23, 2008 – CHEMICAL TECHNICAL SESSION I –
ROSEWOOD, (Hilton)
8:30 A.M. – 11:30 A.M. Presiding – Roger Lawrence
PCIC – 2008 – 13 Understanding the Design of Stators and Rotors of Squirrel Cage Induction Motors
Howard Barr Emerson Electric
Austin Bonnett Emerson Electric Retired
Chuck Yung Electric Apparatus Service Association
PCIC – 2008 – 14 Experimental Evaluation of a High-Speed Permanent-Magnet Machine
Daniel M Saban Direct Drive Systems
Cassandra Bailey Direct Drive Systems
Delvis Gonzalez-Lopez Direct Drive Systems
Ladislau Luca Direct Drive Systems
PCIC – 2008 – 15 A COMPARISON BETWEEN INDUCTION & SYNCHRONOUS MOTORS FOR APPLICATIONS IN THE OIL & GAS INDUSTRY
Rami Dabbousi Saudi Arabian Oil Company
Djordje Savinovic ABB Products
Yngve Anundsson ABB Products
TUESDAY, SEPTEMBER 23, 2008 – TRANSPORTATION TECHNICAL SESSION I –
REGENCY EF, (HYATT)
8:30 A.M. – 11:30 A.M. Presiding – Richard Paes
PCIC – 2008 – 16 Why neutral -Grounding Resistors Need Continuous Monitoring
Donald Selkirk Startco Engineering Ltd.
Kenneth Crawford DuPont
Merv Savostianik Startco Engineering Ltd.
PCIC – 2008 – 17 INDUCTION MOTOR VIBRATIONS IN VIEW OF THE API 541- 4th EDITION
Rajendra Mistry Siemens Energy & Automation
William Finley Siemens Energy & Automation, Inc.
Scott Kreitzer Siemens Energy & Automation
Merv Savostianik Startco Engineering Ltd.
PCIC – 2008 – 18 Thermal Protection of Undocumented AC Motors
Mark Zeller Schweitzer Engineering Laboratories,
Ed Lebenhaft Schweitzer Eng Labs, Inc.
TUESDAY, SEPTEMBER 23, 2008 – ELECTROCHEMICAL TECHNICAL SESSION –
CONTINENTAL, (HILTON)
8:30 A.M. – 11:30 A.M. Presiding – Dave Gunnels
PCIC – 2008 – 19 Advances in Industrial Substation Design using Three Winding Power Transformers
Doug Brooks Bantrel Co.
Don Morency Suncor
Pascal Tang Northern Transformers
PCIC – 2008 – 20 Comparison of AC to DC Rectifier Topologies Operating on Various Power Distribution Networks
Rick Hoadley Rockwell Automation
Sheldon Kennedy Niagara Transformer Corporation
Gary Skibinski Rockwell Automation
PCIC – 2008 – 21 Oil Field HARMONIC CONCERNS RESULTING FROM HIGH IMPEDANCE SOURCES, Multiple POWER CONVERTERS AND LONG CABLES
Paul Buddingh Universal Dynamics Ltd.
Valentina Dabic BC Hydro
Harry Groten Nexen, Inc.
TUESDAY, SEPTEMBER 23, 2008 – MARINE TECHNICAL SESSION –
ROOKWOOD, (HILTON)
8:30 A.M. – 11:30 A.M. Presiding – Don Voltz / Rudy Bright
PCIC – 2008 – 22 Meeting New Marine Harmonic Standards
Anthony Hoevenaars Mirus International Inc.
Ian Evans Harmonic Solutions Co. Uk
Andy Lawson Parkburn Precision Handling Systems
PCIC – 2008 – 23 THE SHIP POWER ELECTRONIC REVOLUTION: ISSUES AND ANSWERS
Terry Ericsen Office of Naval Research
PCIC – 2008 – 24 Diesel ENGINE Generation APPLICATIONS on SHIPS AND MOORED fLOATING FACILITIES.
Donald Voltz BP Exploration & Production, Inc.
Moni Islam Northrop Grumman Ship System
Chris Chaney Mustang Engineering, L.P.
WEDNESDAY, SEPTEMBER 24, 2008 – CHEMICAL TECHNICAL SESSION II –
CONTINENTAL, (HILTON)
8:30 A.M. – 11:30 A.M. Presiding – Dennis Bogh
PCIC – 2008 – 25 Stator Insulation System Evaluation and Improvement for Medium Voltage Adjustable Speed Drive Applications
William Chen TECO-Westinghouse Motor Company
George Gao TECO-Westinghouse Motor Company
Craig A Mouton ExxonMobil Chemical Co.
PCIC – 2008 – 26 Better, Faster, and More Economical Integrated Protective Relaying and Control using Digital Bits and Logic
John J Novak Jr. The DOW Chemical Company
Richard D Kirby Schweitzer Engineering Laboratories
PCIC – 2008 – 27 High-Speed Transfer of Two 4 kV Motor Bus Sources Using a Digital Motor Bus Transfer System
Gregory T Orr Eastman Chemical Company
Scott Cooper Beckwith Electric Co. Inc.
WEDNESDAY, SEPTEMBER 24, 2008 – REFINING TECHNICAL SESSION II –
REGENCY EF, (HYATT)
8:30 A.M. – 11:30 A.M. Presiding – Gabe D’Alleva
PCIC – 2008 – 28 Cost-Efficient Applications of Bus Transfer Schemes Utilizing Microprocessor Based Relaying Technology
Ron Beltran GE Multilin
Hyder Docarmo GE MULTILIN
Michael Eaton Petro-Canada Oil Sands Eng
Mike Noonan Petro-Canada Oil Sands Eng
PCIC – 2008 – 29 PWM Inverters PRODUCING torsional components in AC Motors
Russel Kerkman Rockwell Automation
Jeff Theisen Rockwell Automation
Kirti Shah Tesoro Corporation
PCIC – 2008 – 30 LARGE ELECTRICAL DRIVES – SETTING TRENDS FOR OIL & GAS APPLICATIONS
Horst Kuemmlee Siemens
Philip Wearon Shell Global Solutions International
Fritz Kleiner Siemens
WEDNESDAY, SEPTEMBER 24, 2008 - TRANSPORTATION TECHNICAL SESSION II –
BUCKEYE AB, (HYATT)
8:30 A.M. – 11:30 A.M. Presiding – David Heine
PCIC – 2008 – 31 Electronic Motor Circuit Protectors
Terry Schiazza Schneider Electric
Alan Schmidt Schneider Electric
PCIC – 2008 – 32 ADJUSTABLE SPEED DRIVE APPLICATIONS AS RELATED TO THE OIL SANDS PROCESS
Bill Livoti Baldor Dodge Reliance
Mark Throckmorton Shell Canada
Rick Paes Rockwell Automation
PCIC – 2008 – 33 ELECTRIC GUT TRACING - AN INNOVATIVE APPROACH TO PIPELINE HEATING
Franco Chakkalakal Tyco Thermal controls
Ronald Sweigart DuPont
Jeff Pulter Marathon Ashland Petroleum
Gustavo Saldarriaga Tyco Thermal Controls
WEDNESDAY, SEPTEMBER 24, 2008 – PRODUCTION TECHNICAL SESSION II –
ROOKWOOD, (HILTON)
8:30 A.M. – 11:30 A.M. Presiding – Larry Saunders
PCIC – 2008 – 34 Alarm & Paging Acoustics on Offshore Installations
Bret Cadmus GAI-Tronics Corp.
Christopher Chaney Mustang Engineering, L.P.
Hans Forschner, Sr. Navcon Engineering Network
PCIC – 2008 – 35 Innovative Heating and Power/Control Solutions for Offshore Wells with Wax/Paraffin Issues
Greg McQueen Tyco Thermal Controls
David Parman Tyco Thermal Controls
Pete Reindl Advance Power Electronics ABB Inc
PCIC – 2008 – 36 Optimal System Reliability: The Way Forward
Roger Lawrence RGLSolutions
Donald Dunn Aramco Services Company
WEDNESDAY, SEPTEMBER 24, 2008 – INTERNATIONAL TECHNICAL SESSION –
PAVILLION, (HILTON)
8:30 A.M. – 11:30 A.M. Presiding – Estellito Rangel Jr.
PCIC – 2008 – 37 PURGED & PRESSURIZED MOTORS MADE TO IEC/NEC/CEC ZONE 1 (EX P) & TO NEC/CEC DIVISION 1 (TYPE X): ARE THEY THE SAME?
Bharat Mistry GE Consumer & Industrial
William Lawrence FM Approvals LLC
PCIC – 2008 – 38 A Comparison of International Wiring and Grounding Systems with North American Methods
John Gardner Appleton Electric Company
Joe Alanis Bechtel Corporation
PCIC – 2008 – 39 Enhanced Communication between field devices and automation systems in hazardous locations
Andre Fritsch R. STAHL Schaltgeraete GmbH
Robert Seitz ASRC EnergyServices
WEDNESDAY, SEPTEMBER 24, 2008 – SAFETY TECHNICAL SESSION –
PAVILLION, (HILTON)
2:00 P.M. – 5:00 P.M. Presiding – Jim Bowen
PCIC – 2008 – 40 Comparative Study of Arc Modeling and Arc Flash Incident Energy Exposures
PK Sen Colorado School of Mines
Ravel Ammerman Colorado School of Mines
Tammy Gammon Consultant
John Nelson NEI Electric Power Engineering
PCIC – 2008 – 41 SAFETY FIRST: DETECTION OF DOWNED CONDUCTORS & ARCING ON OVERHEAD DISTRIBUTION LINES
Mark Adamiak GE Multilin
PCIC – 2008 – 42 The Importance and Process of Auditing an Electrical Safety Program
John Aeiker DuPont
Shahid Jamil Imperial Oil
Daryld Ray Crow DRC Consulting, Ltd.
|
